AutoDigi for Palm OS 2.5

Does your palm's digitizer get misaligned frequently? Do you need to re-calibrate your digitizer repeatedly? Does your digitizer fail after a reset? AutoDigi is the complete solution to your digitizer woe.

Features:

Single tap access to the digitizing screen - Running AutoDigi from your launcher will immediately start the calibration process. There is no need to start the digitizer from the Prefs application.
Calibrate after a soft reset - Normally, after a soft reset, the Prefs screen will appear. With AutoDigi, the calibration screen will show after a soft reset. This allows you to calibrate the digitizer. After calibration, the Prefs screen will be displayed.
Save your digitizer setup - AutoDigi will capture and save the digitizer setup or configuration each time you calibrate using AutoDigi, either through a soft reset or running AutoDigi from the launcher.
Auto-calibration at regular intervals - AutoDigi will automatically calibrate your digitizer in the background at a frequency determined by you. The auto-calibration uses the digitizer setup that is captured and saved by AutoDigi. This auto-calibration occurs even when your handheld is switched off.

Requirements:

· PalmOS 2
· 5KB

What's New in This Release: [ read full changelog ]

· Created another version to support PalmOS 3.2 and above. This solves the auto-power-off issue. Increase the auto-calibration interval options for more user control.